Sharp MD-M3H Minidisc Operation, MD playback, To remove a MiniDisc, To interrupt playback

MINIDISC OPERATION

■MD playback

1 Press the ON/STAND-BY button to turn the power on.

2 Press the MD button.

3 Load a MiniDisc in the direction indicated by the arrow on the MiniDisc, with the labeled side fac- ing up.

1

3

7

●The total number of tracks and the total playing time on the MiniDisc will be displayed.

4 Press the 0 6 button.

● If the MD has a track name, the name will ap-

pear and scroll across the display. Then, the

H 4

elapsed playing time will appear.

● If the MD has no track names, the elapsed play-

2

2

H

ing time will appear.

● When the last track has been played back, the

unit will stop automatically.

To interrupt playback:

Press the 0 6 button.

● " 6 " will appear.

● Press the 0 6 button again to resume playback

1

4

from the same point.

To stop playback:

Press the ■ button.

To remove a MiniDisc:

Press the 7 MD EJECT button.

DISC
MEMORY
RANDOM	kHz REC
TOTAL
REMAIN	MHz SLEEP

Disc name

(Displayed only when a disc name has been programmed)

Flash

DISC TOC
TRACK
MEMORY
RANDOM	kHz REC
TOTAL
REMAIN	MHz SLEEP

Total number of tracks Total playing time

Notes:

●If TV or radio interference occurs when using the MD, move the unit away from the TV or radio.

●Although MiniDiscs will not normally skip due to vibration, you may hear a skip in the sound if there is continuous vibration.

If the volume is turned up too high, a skip may occur depending on the contents of the MD.

If this happens, turn the volume down and the skipping should stop.

●If any (or some) error messages is displayed dur- ing MD operation, see "ERROR MESSAGES" on page 47.

12