Sharp MD-M3H Removing the speaker grilles, Connecting the AC power lead, Speaker cushion, Demo

(Continued)

■ Removing the speaker grilles ■ Connecting the AC power lead

1 Remove the lower part of the speaker grille first. 2 Remove the upper part of the speaker grille.

Caution:

When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure nothing comes into contact with the speaker diaphragms.

■Speaker cushion

Attach the cushions to the bottom of the speaker to prevent it from sliding.

■Placing the system

10 cm (4") 10 cm (4")

20 cm (8")

10 cm (4")

●Be sure to keep space between the units for ven- tilation.

●Keep the top of this unit at least 20 cm (8") away from the wall, and the back at least 10 cm (4") away.

Note:

●Do not place the system or speakers near the television set as the magnetic fields produced may cause irregular colours to be displayed.

AC 230 V, 50 Hz

AC INPUT

To AC INPUT

To an AC socket

Connect the AC power lead to the AC INPUT socket, then connect the AC power lead plug to an AC socket.

Notes:

●Unplug the AC power lead from the AC socket if the unit will not be in use for a prolonged period of time.

●Never use a power lead other than the one sup- plied. Use of a power lead other than the one supplied may cause an electric shock or fire.

■Demo mode

DEMO

ON

OFF

When the AC power lead is first connected, the unit will enter the demonstration mode and the words will scroll across the display continuously.

To cancel the demonstration mode:

When in the demonstration mode, set the DEMO switch to OFF.

Then turn the power on and enter the stand-by mode to cancel the demonstration mode and to enter the low power consumption mode.

Note:

●When the unit is in the low power consumption mode, the display will disappear.

To return to the demonstration mode:

Set the DEMO switch to ON. Then turn the power on and enter the stand-by mode.

7