USING EXTERNAL UNITS
■Connecting external units
Before connecting external units, set this unit to the
Connecting to stereos or MD/CD players (equipment which can output analogue signals)
The other MD/CD player
To the output / Commercially available lead
headphone socket with 3.5 mm (1/8") stereo
RIGHT 
LEFT
AUX
INPUT
LEVEL
RIGHT LEFT
AUX
INPUT
LEVEL
RIGHT LEFT
To the analogue output sockets
LEFT | RIGHT | RIGHT | LEFT |
|
| ||
|
|
| ● Red plug → To RIGHT |
|
|
| ● White plug → To LEFT |
Commercially available RCA lead
Note:
●When the audio output signal of an external unit is connected to this unit, oscillation may occur. In such a case, disconnect either the input or output connection.
■Headphones
Notes:
●Before plugging in or unplugging the headphones, make sure the volume level is reduced.
●Be sure your headphones have a 3.5mm (1/8˝) diameter plug and are between 16 ohms and 50 ohms /impedance. The recommended impedance is 32 ohms.
●When headphones are connected, the speakers are disabled automatically. Adjust the VOLUME control for the desired volume.
42
