(Continued)
■To create a track name
Name each track.
A track’s name will be displayed whenever you select it and during playback.
(Remote control operation)
NAME/ |
| |
TOC EDIT | DISPLAY | |
| ||
/ | ENTER | |
CLEAR | ||
|
1 During playback or in the pause mode, press the NAME/TOC EDIT button.
REC
SLEEP
2 Within 10 seconds, press the ENTER button.
TRACK | TRACK |
REC
SLEEP
●The unit will enter the character input mode.
●The track you are listening to will be played repeatedly.
3 Press the DISPLAY button to select the type of characters.
4 Select the character you want pressing the 
or 
button.
REC
SLEEP
5 Press the ENTER button to enter the character.
REC
SLEEP
●Repeat steps 3 to 5 above to enter the charac- ters in the name. When the next character’s type is the same as the previous character, step 3 can be skipped.
6 After entering all of the characters in the name, press the NAME/TOC EDIT button.
REC
SLEEP
●The track name will be recorded.
●The unit will return to normal playback.
●Press the 0 6 button in the pause mode, the unit woll return to normal playback.
To erase a track name:
After performing steps 1 to 2.
1Press the CLEAR button for 2 seconds or more.
●“NAME CLEAR” will flash.
2Press the ENTER button.
Notes:
●Up to 40 characters can be entered.
●This function cannot be used in the random play mode and APMS play mode.
●If you create a track name whilst recording the track, make sure you finish entering the name before you finish recording the track.
If the end of the recording is reached before you have entered the complete name, only the char- acters entered before the recording ended will be recorded.
34
