(Continued)
■Preset tuning
You can store up to 40 stations in memory (40 sta- tions consisting of any combination of AM and FM stations you like) and recall them.
|
| 3 |
2,4 | 3 | 2,4 |
|
To enter stations into memory:
1 Perform steps 1 - 5 in the "Tuning" section.
2 Press the MEMORY button.
MEMORY | MEMORY |
3 Within 5 seconds, press the PRESET (X or W) button to make the preset channel number flash in the display.
MEMORY
●Store the stations in memory, in order, starting with preset channel 1.
When 
is displayed, a station has already been stored in this preset number memory.
4 Within 5 seconds, press the MEMORY button to store that station in the selected station pre- set number memory.
MEMORY | MEMORY |
●If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other preset stations, or to change a preset station.
●When a new station is stored in the selected sta- tion preset number memory, the contents previ- ously memorised will be erased.
●To store an RDS station in memory, perform steps 2 - 4 whilst the RDS station name is being dis- played.
To recall a memorised station:
Press the PRESET (X or W) button for less than 0.5 seconds to select the desired station.
●The stations (preset channel number, frequency and frequency band) which have been stored in memory will appear in the display in numerical order, irrespective of the frequency bands.
Backup function:
The backup function protects all station presets for a few hours should there be a power failure or the AC power lead is removed from the AC socket.
■Preset memory scan
The stations saved in the preset memory can be scanned automatically.
PRESET
(X W)
PRESET
(X W)
1 To scan the preset stations, press the PRESET (X or W) button for more than 0.5 seconds.
●The station preset number will flash and the pro- grammed stations will be tuned in sequentially, for 5 seconds each.
2 Press the PRESET (X or W) button again to stop the memory scan at the desired station.
To erase all memorised stations:
When the unit is in the
●"PRESET CLR" will appear.
To erase the memorised station:
1 Recall the memorised station to erase by press- ing the PRESET button.
2 Press the CLEAR button.
●"MEMORY" will flash.
3
4 Repeat steps
Note:
When the preset memory does not have any sta- tions stored in it, the preset memory scan will not
17function.
