To manually recall the stations stored in memory | Sharp MD-M3H

(Continued)

■To manually recall the stations stored in memory

PRESET(X W)

PRESET(X W)

Each time you press the PRESET (X or W) button the channel number will change.

●After the channel number has been displayed for 2 seconds, the frequency for that channel will appear for 2 seconds, and then the station name will appear.

■To switch the display

(Main unit operation)

DISPLAY

MODE

Each time the DISPLAY MODE button is pressed whilst an FM station is tuned in, the display will switch as follows:

Station name (PS)

Programme type (PTY)

Radio text (RT)

Frequency

MHz

When the station you are tuning in is not an RDS station or even if it is an RDS station but it is very weak signal, the display will change in the follow- ing order:

Frequency

MHz

■Notes for Radio text

●The radio text for 10 characters will be displayed steadily for 4 seconds and then it will scroll across the display.

●If you tune into a station which is not broadcast- ing any radio text, even if it is an RDS station, when you switch to the radio text position "NO RT" will be displayed.

●Whilst radio text data is being received or when the text contents change, "RT" will be displayed.

■Notes for RDS operation

If any of the following events occur, it does not mean that the unit is faulty.

●"PS", "NO PS" and a station name appear alter- nately, and the unit does not operate properly.

●If a particular station is not broadcasting prop- erly or a station is conducting tests, the RDS re- ception function may not work properly.

●When you receive an RDS station whose signal is too weak, information like the station name may not be displayed, even if "RDS" is lit.

Notes:

●"NO PS", "NO PTY" or "NO RT" will flash for about 5 seconds, and then the frequency will be displayed.

●The display can only be switched whilst tuned to the FM band.

24

Image 26

Sharp MD-M3H operation manual To manually recall the stations stored in memory, To switch the display, Presetx W

Contents

Contents MD-M3H Terms of Guarantee A9903.YT Service Information Special Notes Volume control AccessoriesPrecautions General Rear panel Names of Controls and IndicatorsFront panel Speaker section 16 17 18 19 20 21Display window Remote control MD/CD Section Speaker connection Preparation for USEAerial connection Speaker cushion Removing the speaker grilles Connecting the AC power leadDemo mode Placing the system Play Remote controlPrecautions for battery use To change the brightness of the dis To see the time display Setting the ClockTo change the time display mode To change the clock time Extra bass X-BASS VolumeSound Control Pre-programmed equalizer Surround To interrupt playback Compact Disc OperationCD playback To stop playback To remove a MiniDisc Minidisc OperationMD playback Repeat and random play Convenient CD and MD OperationApss Auto Program Search Sys- tem Cue and review To clear the programmed selections To cancel the ApmsApms Automatic Programmable Music Selector To check which tracks are programmed Time Switching the time displayChanging the display during MD playback Auto tuning TuningManual tuning Press the ON/STAND-BY button to enter the stand- by mode Preset tuning Preset memory scan PTY Display ModeInformation provided by RDS Test Alarm None To stop the Aspm operation before it is complete To erase all of the contents of preset memoryAspm Auto Station Program Memory To cancel the station select operation Page If you have selected the traffic programme To manually recall the stations stored in memory To switch the displayPresetx W About the Ptyi Dynamic PTY Indicator Checking the stand-by mode settingTo cancel the EON stand-by mode Meaning When in the EON stand-by mode, press the EON button EON-TI About the TP and TA indicators TP indicator TA indicator Meaning Disc writing TOC About track numbers RecordingDifferences from tape recordings To check the remaining time available for recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recording CD0MD Edit High /NORMAL To record without using One-Touch EditingApms recording Recording is performed as a single track Recording from the built-in radio onto a MiniDiscTo record the track number whilst record- ing Type of characters used EditingWhat the editing function can do Within 10 seconds, press the Enter button To create a disc nameTo erase a disc name Press the Enter button to enter the character To create a track name To erase a track name Name TOC Edit Enter Clear To change disc names and track namesTo add a character Example To change Besut to Best Combine When both tracks have a nameDivide Example MoveTo combine two non-contiguous tracks To erase tracks one at a time EraseAll Erase To erase all of the tracks at once Timer Operation Timer playback Timer recording To use sleep and timer playback in combi- nation Simultaneous sleep and timer op- erationTo cancel the sleep operation To use sleep and timer recording in com- bination Headphones Using External UnitsConnecting external units Listening to sound from an exter- nal unit Manual recording What is a MINIDISC? Symptom Possible cause Remedy TroubleshootingIf a problem occurs Mini Disc System Limitations MD recording and playback Symptom Possible causeCD Playback Radio reception Error Messages When an error message is displayed, proceed as follows Care of compact discs Resetting the Microcom Maintenance PuterExternal care Specifications Memo