Sharp UX-D50 manual Registering Cordless Handsets, Automatic registration, On the fax machine

all.book Page 56 Monday, September 1, 2003 3:46 PM

Registering Cordless Handsets

Registering Cordless Handsets

In order to be used, a cordless handset must first be registered in the fax machine. The cordless handset that came with the fax machine is already registered. To register an additional cordless handset, follow the steps in Automatic registration or Custom registration on the following pages.

♦Use automatic registration when you are only registering the cordless handset in one fax machine and the system PIN number has not been changed from its initial setting (0000) (see page 58). This is the easiest method of registration and does not require entering the System PIN number.

♦Use custom registration when the system PIN number has been changed to a number other than 0000. The system PIN number must be entered during registration.

♦A cordless handset can be registered in up to four fax machines. To register the cordless handset in multiple fax machines, repeat the custom registration procedure using each fax machine. To select which fax machine the cordless handset will normally be used with, see page 61.

Automatic registration

Use automatic registration when you are only registering the cordless handset in one fax machine and the system PIN number has not been changed from its initial setting (0000).

On the fax machine

1

2

3

4

	FUNKTION once and	Fax machine display:
Press		once.
		DECT SETTING
Press	once.	HS ENTRY
Press	once.	PRESS START KEY
Press START/SPEICHER .		WAITING HS ENTRY

56