Sharp UX-D50 manual Sending a Fax by Automatic Dialling, Without the need to press the R

all.book Page 88 Monday, September 1, 2003 3:46 PM

Sending a Fax by Automatic Dialling

Sending a Fax by Automatic Dialling

You can store up to 40 fax or phone numbers in the fax machine for automatic dialling.

♦Auto-dial numbers are dialled by pressing until the desired number

appears in the display, and then START/SPEICHER .

Storing fax and phone numbers for automatic dialling

1

2

	FUNKTION once and	Display:
Press		once.
		<NEW NUMBER>
Press	once.	ENTER FAX #

3 Enter the fax or voice number by pressing the number keys. Up to 32 digits can be entered. (Note: A space cannot be entered.)

•To clear a mistake, press .

•If a pause is required between any of the digits to access a special service or an outside line, press FUNKTION . The pause appears as a hyphen. Several pauses can be entered in a row.

•If you are on a Flash-type PBX and are storing a number for an outside line,

press R , press FUNKTION to insert a pause, and then enter the fax or voice number. (When you dial the auto-dial number, you will automatically dial out

without the need to press the R key.)

•If you are on a PBX that requires dialing a number to dial out and are storing a number for an outside line, enter the number, press FUNKTION to

insert a pause, and then enter the number of the receiving machine. (When you dial the auto-dial number, you will automatically dial out without the need to dial the number for an outside line.)

88