Sharp UX-D50 manual Receiving Faxes, Using TEL/FAX Mode, Pseudo Ring Duration for Tel/Fax Mode

all.book Page 97 Monday, September 1, 2003 3:46 PM

5. Receiving Faxes

Using TEL/FAX Mode

To select TEL/FAX mode, press

in the display points to TEL/FAX.

AUFLÖS./
EMPFANG	until the arrow

AUFLÖS./	TEL	FAX
EMPFANG
	TEL/FAX	AB

When the reception mode is set to TEL/FAX, your fax machine automatically answers all calls on two rings. After answering, your fax monitors the line for about five seconds to see if a fax tone is being sent.

♦If your fax machine detects a fax tone (this means that the call is an automatically dialled fax), it will automatically begin reception of the incoming document.

♦If your fax machine doesn't detect a fax tone (this means that the call is a voice call or manually dialled fax), it will make a ringing sound (called pseudo ringing) for 15 seconds to alert you to answer. If you don't answer within this time, your fax will send a fax tone to the other machine to allow the calling party to send a fax manually if they desire.

Note: Only the fax will alert you to voice calls or manually dialled faxes by pseudo ringing. An extension phone connected to the same line will not ring after the connection has been established.

Pseudo Ring Duration for Tel/Fax Mode

If desired, you can change the duration of pseudo ringing in Tel/Fax mode.

1 Press FUNKTION once and twice.

Display:

OPTION SETTING

97