29.10.99

kap04.fm5

Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

Outgoing calls

Suppressing code numbers for redial

When you dial a telephone number it is incorporated into the redial list. Both the number dialled after this number, e.g. an extension number and a subsequent secret “serv- ice number” is added to the telephone numbers in the re- dial list. To prevent the incorporation of secret numbers, activate “temporary tone dialling” – e.g. after the exten- sion number (page 53) even if your telephone is set to tone dialling.

Suppressing display of telephone numbers on called party’s unit

To suppress display of your telephone number on the called party’s unit, use a sequence of telephone services (CLIR). To do this, your telephone must be set to tone di- alling (DTMF).

Press the off-hook key.

c

Enter Service sequence for telephone number suppres- *31# sion, wait for dial tone and then

dial the telephone number.

o

A prerequisite here is that the network provider must support this function.

Dialling with speed dialling numbers

 

If you have programmed speed dialling numbers

 

(page 32), you can dial the associated number by enter-

 

ing a speed dialling number.

c Seize the dialup line. You hear dial tone.

Qo

Press the speed dialling key and enter the speed dialling

code (0 to 9) for the required number.

or

If you are not sure of the speed dialling code for the

Qrequired number: keep pressing the speed dialling key until both numbers appear on the display.

oEnter the speed dialling code displayed (4 in this example).

8

Page 17
Image 17
Siemens 2015 Outgoing calls Suppressing code numbers for redial, Dialling with speed dialling numbers