Siemens 2015 Answering machine Initiating remote operation, From the handset

29.10.99 kap12.fm5 Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

The answering machine

Initiating remote operation

	In order to operate the answering machine remotely, you
	must first activate the remote function.
From the handset
I	Press the keys on the handset in order to call the
	9 answering machine. This results in output of a “ready
	tone”, the mode of operation, the current number of
	messages in storage, and (if applicable) the day and
	the time.

From another telephone with DTMF-capability

YYou call your own number from a remote station. If the DID function is activated, you hear a high multiple tone. The answering machine switches on after 5 seconds.

After the message, press the pound key and enter the

#o system code via the telephone’s dialling keypad. For checking purposes, the telephone outputs a stand-by tone, the operating mode, the current number of mes- sages saved as well as the relevant weekday and time.

If you enter the incorrect system code, the an- nouncement "Faulty PIN" is output at the tele- phone. You can then re-enter the system code.

The connection is automatically cleared down after the third incorrect attempt.

Remote operation and DID from another tele- phone are only possible if a system code which is different from the default system code has been programmed (➔ page 19).

Remote operation is still possible even if the an- swering machine has been switched off. In this case you simply continue ringing until the an- swering machine responds.

52