
29.10.99 | kap16.fm5 | Gigaset 2015 plus, GBR: |
Important informations
Self-help in the event of a fault
Not every malfunction means that there is an actual defect in your telephone. In some situations, you can save time and money if you eliminate the causes of simple faults yourself. The information below will help you do this.
Symptom | Cause | Corrective measure |
|
|
|
Audio message: “Time set- | There has been a brief break | The day and time must be reset |
ting not available” | in the power supply | (➔ page 23). |
|
|
|
No display at the handset | The handset is not switched | Switch on the handset |
| on |
|
| The battery is empty | Replace the battery with a standby |
|
| battery or recharge it |
|
|
|
No display at the base sta- | No message available |
|
tion |
|
|
|
|
|
Dialup line cannot be seized; | The plug of the telephone | Check the plug at the base station |
no dialling tone. | connecting cable is not in- | and the telephone socket; recon- |
| serted correctly | nect if necessary (➔ page 2). |
| The plug of the power con- | Check the plug at the base station |
| necting cable is not inserted | and the 220V/230V socket; recon- |
| correctly. The plugs may | nect if necessary (➔ page 2). |
| have been connected |
|
| wrongly. |
|
| The dialup line is being used | Wait until the dialup line is free |
| by another handset |
|
|
|
|
No radio contact to the base | The handset is not logged on | Log on the handset at the base sta- |
station; the Nsymbol on the |
| tion (➔ page 57) |
handset is flashing. |
|
|
| The plug of the power con- | Check the plug at the base station |
| necting cable is not inserted | and the 220V/230V socket; recon- |
| correctly | nect if necessary. |
|
|
|
No tone ringing from the | The volume of the tone | Adjust the volume of the tone ring- |
base station or handset | ringing is set too low | ing at the base station (➔ page 27) |
|
| or the handset (➔ page 29) |
| Assignment of ringing set | Set the ringing assignment |
| wrongly | (➔ page 59) |
|
|
|
No connection after dialling | Wrong dialling method | Reset the dialling method |
the number; dial tone can |
| (➔ page 16) |
still be heard. |
|
|
|
|
|
72