29.10.99 | kap15.fm5 | Gigaset 2015 plus, GBR: |
Operation with several base stations
Operation with several base stations
You can “log on” and operate your handset at up to 4 Gi- gaset base stations of the Gigaset family (from Gigaset 1010 and Gigaset 2010 and higher).
This has the following advantages:
●You can operate the same handset at geographically dispersed base stations (e.g. at home and in the office).
●In large premises, a number of base stations can be positioned to give you much wider coverage with the same handset.
Note the following important points when oper- ating a handset at several base stations:
● Calls in progress are interrupted or cleared down when you switch from the radio range of one base station to the radio range of another base station.
● Internal calls can only be made within the radio range of a base station - not to hand- sets which are within radio range of a differ- ent base station.
● If your handset is switched on and you are out of range of all base stations for several minutes, it can take up to 20 min- utes to “relocate” a base station. In such cases you can speed up the process of relocation by switching the handset
on and off (➔ page 14).
Activating/deactivating base station number display on handset
B36
1B
or
0B
You can program your handset to display the base station with which the unit has radio contact.
Start the procedure. The current setting is displayed:
361 = activated, 36 0 = deactivated. Activate the base station number display.
Deactivate the base station number display (default).
61
