Important basic settings
24
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619
kap07.fm5
29.10.99
Resetting the base station to the default stateWith this procedure you can change the following set-
tings back to the default (factory) state:
●signalling method (➔page 16)
●length of pause after trunk code/main trunk code
(➔page 19)
●assignment of ringing (➔page 59)
●charge factor (➔page 35)
●direct dialling-in (➔page 59)
The following stored data is deleted:
●trunk code/main trunk code
●rate units/charges
The stored system code (➔page 19) and the
messages/announcements on the answering
machine are not deleted. All logged-on hand-
sets remain registered.
B#1 Start the procedure.
oEnter the 4-digit system code (default: “0000”)
(➔page 19).
O250BReset the base station to the default state.