Siemens 2015 Important basic settings Trunk codes, Entering trunk code/main trunk code

29.10.99 kap07.fm5 Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619

Important basic settings

Trunk codes

If you operate your Gigaset 2015 plus in conjunction with a PBX (telecommunications system), you can set the fol- lowing for switching to the public telephone network:

●the trunk code

●the length of the pause following the trunk code (if a dial pause is required after the trunk code has been entered).

If the PBX is a satellite to a main PBX, you can set the following:

●the trunk code

●the main trunk code

●the length of the pause following the trunk code/main trunk code

For details of the trunk code/main trunk code and the length of pause please refer to the PBX documentation.

Entering trunk code/main trunk code

The trunk codes/main trunk codes consist of 1, 2 or 3 dig-

its and can consist of digits 0to 9 and keys :, # and R.

Start the procedure.

B#0

Enter the 4-digit system code (default: “0000”)

o(➔ page 19).

Select the trunk code.

O

or

Select the main trunk code.

OO

Enter the trunk code/main trunk code. If there are several

ocodes, you can press O again to enter the next code.

Store the setting.

B

18