Issue A1 Safety Instructions
MICROMASTER 410 Operating Instructions
6SE6400-5EA00-0BP0 7
Safety InstructionsThe following Warnings, Cautions and Notes are provided for your saf ety and as a
means of preventing damage to the product or components in the machines
connected. This section lists Warnings, Cautions and Notes, which appl y generally
when handling MICROMASTER 410 Inverters, classified as General, Transport &
Storage, Commissioning, Operation, Repair and Dismantling & Disposal.
Specific Warnings, Cautions and Notes that apply to particular activities are
listed at the beginning of the relevant chapters and are repeated or supp lemented
at critical points throughout these sections.
Please read the information carefully, since it is provided for your personal
safety and will also help prolong the service life of your MICROMASTER 410
Inverter and the equipment you connect to it.
General
WARNING
♦ This equipment contains dangerous voltages and controls potentiall y
dangerous rotating mechanical parts. Non-compliance with Warnings or
failure to follow the instructions contained in this manual can r esult in loss of
life, severe personal injury or serious damage to property.
♦ Only suitable qualified personnel should work on this equipment, an d only
after becoming familiar with all safety notices, installation, o peration and
maintenance procedures contained in this manual. The successf ul and safe
operation of this equipment is dependent upon its proper handling,
installation, operation and maintenance.
♦ Risk of electric shock. The DC link capacitors remain charged for f ive minutes
after power has been removed. It is not permissible to open the equip-
ment until 5 minutes after the power has been removed.
CAUTION
♦ Children and the general public must be prevented from accessing or
approaching the equipment!
♦ This equipment may only be used for the purpose specified by the
manufacturer. Unauthorized modifications and the use of spare parts and
accessories that are not sold or recommended by the manufacturer of the
equipment can cause fires, electric shocks and injuries.
NOTES
♦ Keep these operating instructions within easy reach of the equipm ent and
make them available to all users
♦ Whenever measuring or testing has to be performed on live equipment, the
regulations of Safety Code VBG 4.0 must be observed, in particular §8
“Permissible Deviations when Working on Live Parts”. Suitable e lectronic
tools should be used.
♦ Before installing and commissioning, please read these safety ins tructions
and warnings carefully and all the warning labels attached to the equipm ent.
Make sure that the warning labels are kept in a legible condition and r eplace
missing or damaged labels