Issue A1 3 Commissioning
MICROMASTER 410 Operating Instructions
6SE6400-5EA00-0BP0 41
Motor data for parameterization
Figure 3-7 Typical Motor Rating Plate Example
NOTE
Ø P0308 & P0309 are only visible if P0003 = 3. Only one of the param eters is
shown depending on the settings of P0100.
Ø P0307 indicates kW or hp depending upon the setting of P0100. For de tailed
information, please see the Parameter List.
Ø Changing motor parameters is not possible unless P0010 = 1.
Ø Ensure that the motor is configured correctly to the inverter (star/delta connection).
3.2.4.3 Reset to Factory default
To reset all parameters to the factory default settings; the following param eters
should be set as follows (the operator panel option is required):
1. Set P0010 = 30
2. Set P0970 = 1
NOTE
The reset process can take up to 3 minutes to complete.