Selecting the Oven Mode
Setting the Cooking Mode
Care and Cleaning Use - The OvenCooktop Getting Started
1.Touch COOKING MODE.
2.BAKE will flash in the display.
If no further setting is made within 5 seconds, control will beep and flash. If this occurs, press
START.
3.To change the cooking mode, turn knob.
4.Push START.
The selected mode will appear in the display, along with the default temperature for that mode, which will be blinking.
5.To select a different temperature, turn knob to desired temperature.
6.Touch START. If START is not touched, oven will automatically turn on in 5 seconds.
7.The display alternates between the cooking mode and preheat.
The preheated temperature is also displayed, starting
at 100ºF. The actual temperature increases until set temperature is reached, at which point the oven will beep.
8.To change temperature during cooking, touch TEMPERATURE. Turn the knob to select new Temperature and press START.
9.Once cooking has been completed, touch OFF to turn off oven.
Note: After the oven has been turned off, HOT appears in the display where the cooking mode was. This is to indicate that the oven is off but still hot. When the oven temperature drops below 176° F, HOT is no longer seen in the display.
Oven Operation Time
The oven will automatically shut off after 12 hours (24 hours if the time format is set for 24 hour in the SELECT FUNCTION section).
Oven Vent
The oven vent is located above the cooktop directly below the display.
Caution:
This area may become hot
when the oven is in use
6: 35PM | 380º |
100 | BAKE |
HELPFUL TIP
To back out of a current mode, push OFF.
Selecting OFF when not in a setting mode will stop oven function.
Self Help
It is normal to see steam escaping from the vent and condensation may collect on the backguard and cooktop. This area may become hot when the oven is in use.
Do not block the vent as it is important for air circulation.
