Siemens HG2516UC Use - The Cooktop Getting Started, Delaying the Start of the Self-Clean

Care and Cleaning - Oven

Setting the Self-Clean Mode

1.Touch COOKING MODE.

2.Turn knob until SELF CLEAN mode appears. Press

START.

3.The default cleaning time is 4 hours. To change cleaning time, turn knob to change number of hours. Otherwise, continue to step 4 (See Figure 1).

4.Touch START. SELF CLEAN flashes. Press START.

5.REMOVE RACKS appears in the display as a reminder to remove oven racks (See Figure 2).

6.Touch START again to begin the self clean.

Note: In a normal Self-Clean mode, the door does not lock at the beginning of the cycle; however, it does lock prior to reaching the high self clean temperatures. The door lock symbol will appear in the display at this point.

WARNING

If door does not lock, press Cancel and do not self-

clean; phone 866- 44SIEMENS (447-4363) for service.

Figure 1

4: 00	SELF CLEAN
Figure 2

Delaying the Start of the Self-Clean

Note: The time of day must be correctly set for this

4: 00

SELF CLEAN

option to work properly. See section “Setting the

Clock” in “Setting Up Your Range”, Page 5.

REMOVE RACKS

Use - The Cooktop Getting Started

1.	Touch COOKING MODE.
2.	Turn knob until SELF CLEAN mode appears. Press
	START.
3.	The default cleaning time is 4 hours. To change
	cleaning time, turn knob to change number of
	hours. Otherwise, continue to step 4 (See Figure 1).
4.	Touch START.
5.	Turn knob until DELAYED CLEAN mode appears.
	Press START (See Figure 3).
6.	SELF CLEAN END appears in the display (See Figure 4).

Figure 3

4: 00

SELF CLEAN

Care and Cleaning

Self Help

7.	Turn knob to enter the time of day you want the self-
	clean to end: Set hours, touch time, set minutes.
8.	Touch START. REMOVE RACKS appears in the
	display as a reminder to remove oven racks (See
	Figure 2).
9.	Touch START. The display shows DELAYED CLEAN.

The self-clean will automatically start at the

appropriate time.

Note: In the Delayed Self Clean mode, the door latch

is automatically activated at the beginning of the cycle. The door lock symbol will appear in the display at this point.

NOTE

The oven lights do not operate in the Self Clean mode.

DELAYED CLEAN

Figure 4
5: 45	SELF	CLEAN
	SELF CLEAN	END

After Self-Cleaning:

1.At the end of the programmed cleaning time, the oven will automatically turn off. SELF CLEAN END appears in the display. Press OFF to clear.

Note: To cancel or stop while the mode is operating, touch OFF. The door will not unlock until the oven reaches a safe temperature.

2.The self-clean mode may produce ash which will settle in the oven. If this happens, remove ash with a damp cloth before using the oven.

3.Wipe rack edges with cooking oil to allow for proper glide. Wipe off excess.