![](/images/new-backgrounds/1264335/264335227x1.webp)
Automation and Drives - SCE
9.4Message Indicator
The message indicator is displayed if messages of the specified message class are pending or have to be acknowledged. The message indicator can have two states:
-Blinking: At least one unacknowledged message is pending.
-Static: The messages are acknowledged, but at least one of them is not cleared.
When clicking on the message indicator, the configured action is performed.
In the template picture, set the active level to 1; that puts the message indicator in the foreground. Drag a message indicator into the template picture, and assign the function “ZeigeMeldefenster“ (show message window) at Click and Click with blinking.
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
T I A Training Document | Page 114 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |