![](/images/new-backgrounds/1264335/26433581x1.webp)
Automation and Drives - SCE
6.1.2Work Space
In the work space, the objects of the project are edited. All elements of WinCC flexible are arranged around the work space. Except for the work space, you can arrange and configure all elements according to your own requirements; for example, shifting or hiding.
In the work space, project data is edited either in table form (for example, variables) or graphically (for example, a process image). Each opened editor is represented in the work space on its own tab sheet. For graphic editors, each element is represented by a separate tab sheet. If you have several editors opened at the same time, only one tab sheet is active. To switch to another editor, click on the corresponding register sheet. You can have a maximum of 20 editors opened at the same time.
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Projekt Messages Recipes User Management
T I A Training Document | Page 41 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |