Automation and Drives - SCE
Under Representation, change the size and position of the graphic.
Repeat these steps for inserting the graphics in figures Tank1 to Tank3.
Under Representation, change the size and the position of the three inserted graphics.
Note
If a graphic is inserted by means of an OLE object, the file name is retained.
Don’t forget to save!
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Projekt Messages Recipes User Management
T I A Training Document | Page 54 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |
