Automation and Drives - SCE
We want to generate the function of a button; for that reason, configure now the function
“RuecksetzeBit“ (reset bit) with the variable “hand_zulauf_tank1“ at Loslassen (releasing) the button.
The button is to be operable only in the manual mode.
Under Animations, select Operability.
Set the check mark at Activated.
From the symbols, select “H3_MAN“ as variable.
Enter 1 at “From“ and 1 at “To“.
Set the status to Activated.
The button can only be operated if the variable “H3_MAN“ has the value 1.
For operability (Bedienbarkeit) to be visible, change the background color to Blue at Style (Gestaltung).
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
T I A Training Document | Page 81 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |
