Automation and Drives - SCE
1.PREFACE
In terms of its contents, Module F6 is part of the teaching unit entitled 'Process Visualization’.
Programming
Languages
2 to 3 days Modules C
Fundamentals of
STEP7 Programming
2 to 3 days Modules A
Additional Functions of
STEP7 Programming
2 to 3 days Modules B
Industrial Fieldbus Systems
2 to 3 days Modules
Plant Simulation with
SIMIT SCE
1 to 2 days Modules G
Process
Visualization
2 to 3 days Modules
Frequency Converter on SIMATIC S7
2 to 3 days Modules
IT Communication wirh SIMATIC S7
2 to 3 days Modules E
Learning Objective:
In Module F6, the reader is introduced to the essential functions of the software WinCC flexible 2005.
Typical task definitions are processed using a sample system.
•Installing the software
•Steps for generating a Step7 project
•Inserting an HMI station
•Interface of WinCC flexible
•Configuring display and operator objects
•Configuring messages
•Generating recipe management
•Setting up user management
Prerequisites:
•Knowledge in handling Windows
•Fundamentals of PLC programming with STEP 7 (for example, Module A3 - 'Startup’ PLC Programming with STEP 7)
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
T I A Training Document | Page 6 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |
