![](/images/new-backgrounds/1264335/26433543x1.webp)
Automation and Drives - SCE
4.5.2Variable Declaration
Open FB1 with a double click. Enter the following STAT variables.
<<hand_ablauf = manual outflow;
Enter the following TEMP variables.
<<ablaufmenge = outflow amount>>
Note
The STAT variables are connected to the operator buttons on touch panel TP177B. The TEMP variables are needed for passing on values in FB1.
Preface Installation Project Description Step7 Projekt HMI Station WinCC flexible Project Messages Recipes User Management
T I A Training Document | Page 22 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |