![](/images/new-backgrounds/1264335/26433571x1.webp)
Automation and Drives - SCE
5.2Configuring the HMI Station
At the inserted SIMATIC HMI station, click on Configuration.
Connect the SIMATIC HMI station with the MPI network.
Click on Save and Compile.
Close the configuration.
Note
In the WinCC flexible project, a connection via the MPI is generated automatically.
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
T I A Training Document | Page 36 of 129 | Module |
|
| F6 |
Issued: 02/2008 |
| Operator Control with WinCC flexible 2005 |