
SNMP
Trap
Click SNMP and then Trap. This will load the SNMP trap screen shown below.
Parameter | Description |
IP Address | Traps are sent to this address when errors or specific events |
| occur on the network. |
Community | A community string (password) specified for trap |
| management. Enter a word, something other than public or |
| private, to prevent unauthorized individuals from reading |
| information on your system. |
Version | Sets the trap status to disabled, or enabled with v1 or v2c. |
| The v2c protocol was proposed in late 1995 and includes |
| enhancements to v1 that are universally accepted. These |
| include a |
| management traffic when retrieving a sequence of MIB |
| variables, and a more elaborate set of error codes for |
| improved reporting to a Network Management Station. |
Click Save Settings to proceed, or Cancel to change your settings.