SMC Networks SMCWBR14T-G manual 4-62, Password Settings

CONFIGURING THE BARRICADE

Password Settings

Use this page to restrict access based on a password. For security you should assign one before exposing the Barricade to the Internet.

Passwords can contain from 3 to12 alphanumeric characters and are case sensitive.

Note: If your password is lost, or you cannot gain access to the user interface, press the Reset button (colored blue) on the rear panel (holding it down for at least six seconds) to restore the factory defaults. The default password is “smcadmin”.

Enter a maximum Idle Time Out (in minutes) to define a maximum period of time an inactive login session will be maintained. If the connection is inactive for longer than the maximum idle time, it will be logged out, and you will have to log in to the web management system again. Setting the idle time to 0, will mean the connection never times out.

(Default: 10 minutes)

4-62