ISP SETTINGS

ISP Settings

Please collect the following information from your ISP before setting up the Barricade:

ISP account user name and password

Protocol, encapsulation and VPI/VCI circuit numbers

DNS server address

IP address, subnet mask and default gateway (for fixed IP users only)

Connect the System

The Barricade can be positioned at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however, comply with the following guidelines:

Keep the Barricade away from any heating devices.

Do not place the Barricade in a dusty or wet environment.

You should also remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when you install the Barricade.

Connect the ADSL/Cable Modem Line

Connect the ADSL/cable modem using a CAT-5 Ethernet cable (RJ-45) to the Barricade’s WAN port. Use straight through cable for this connection. The modem is connected to the ADSL line and/or splitter. When inserting the RJ-45 plug, be sure the tab on the plug clicks into position to ensure it is properly seated.

2-5

Page 25
Image 25
SMC Networks SMCWBR14T-G manual ISP Settings, Connect the System, Connect the ADSL/Cable Modem Line