SMC Networks SMCWBR14T-G Industry Canada Statement, EC Declaration of Conformity, Compliances

COMPLIANCES

Industry Canada Statement

Operation is subject to the following two conditions:

1.this device may not cause interference and

2.this device must accept any interference, including interference that may cause undesired operation of the device

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

This device has been designed to operate with an antenna having a maximum gain of 1.5 dBi.

Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

EC Declaration of Conformity

SMC contact for these products in Europe is:

SMC Networks Europe,

Edificio Conata II,

Calle Fructuos Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despi,

Barcelona, Spain.

Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards:

•EN 300 328-1 December 2001 V1.3.1

•EN 300 328-2 December 2001 V1.2.1

•EN 301 489-1 September 2001 V1.4.1

•EN 301 489-17 September 2000 V1.2.1

•EN 60950 January 2000

iv