CONFIGURING THE BARRICADE
Dynamic IP
The Host name is optional, but may be required by some Service Provider’s. The default MAC address is set to the WAN’s physical interface on the Barricade.
If required by your Service Provider, you can use the Clone MAC Address button to copy the MAC address of the Network Interface Card (NIC) installed in your PC to replace the WAN MAC address.
If necessary, you can use the Renew button on the Status page to renew the WAN IP address.
Note: Make sure you record the MAC address that you clone, so that if you lose your settings you will be able to
Click Save Settings to proceed, or Cancel to change your settings.
