SECURITY
The table below lists the Intrusion Detection parameters and their descriptions.
Parameter | Defaults Description |
Intrusion Detection Feature
SPI and
The Intrusion Detection feature of the Barricade limits the access of incoming traffic at the WAN port. When the Stateful Packet Inspection (SPI) feature is turned on, all incoming packets are blocked except those types marked with a check in the SPI section at the top of the screen.
RIP Defect | Disabled | If the router does not reply to an IPX RIP request |
|
| packet, it will stay in the input queue and not be |
|
| released. Accumulated packets could cause the |
|
| input queue to fill, causing severe problems for all |
|
| protocols. Enabling this feature prevents the |
|
| packets accumulating. |
|
|
|
Discard Ping to | Don’t | Prevents a ping on the router’s WAN port from |
WAN | discard | being routed to the network. |
|
|
|
