SMC Networks SMCWBR14T-G manual Wireless Settings, Parameter, Description

CONFIGURING THE BARRICADE

Wireless Settings

Enter your wireless network settings on this page. You must specify a common radio channel and SSID (Service Set ID) to be used by the Barricade and all of its wireless clients. Be sure you configure all of its clients to the same value. For security purposes, you should change the default SSID immediately.

Parameter	Description
Wireless Network Name	The Service Set ID (SSID) is the name of your
(SSID)	wireless network. The SSID must be the same on
	the Barricade and all of its wireless clients.
Broadcast Wireless Network	Enable or disable the broadcasting of the SSID. If
Name	you disable broadcast of the SSID, only devices
	that have the correct SSID can connect. This
	nullifies the wireless network “discovery” feature
	of some products such as Windows XP.
	(Default: Enable)
Wireless Mode	This device supports the following modes; 11g
	only, 11b only, 11b/g mixed mode, Super G-
	Dynamic Turbo and Super G-Static Turbo.
Wi-Fi Channel Number	This device supports the following modes 11g only,
	11b only, 11b/g mixed mode, Super G-Dynamic
	Turbo and Super G-Static Turbo.
Extend Range	Increases the range of the Barricade.
	(Default: Disable)

4-6