150 Océ TDS600Multifunctional Digital SystemUser Manual
When an Apply is performed, first the contents of the cu rrent settings is copied
to the backup file. There are two versions of this file, one for KO setti ngs and
one for SA settings. These files are always stored on the system.
▼
▼▼
▼Load a settings file
1Open the ‘File’ menu and sel ect ‘Open’.
A dialogue box is displayed from where you can choose the right file.
2Clickthe ‘Apply’ button.
The loaded settings are transferred to the system.
Note: This is only possible if the user is logged in as a key operator or system
administrator.
▼
▼▼
▼Specify the custom card
The custom card on the scanner panel co ntains high priority settings. Because
there is only room for five default settings on the basic car d and there are more
functions thatmight qualify, the custom card is programmable.
This option allows you to add or delete current se ttings on the custom card. In
the leftwindow all the available setting groups aredisplayed. In the right
window all the current settings are displayed. You can use the two arrow
buttonsbetween the two windows to add settings to or removesettings from
the custom card.
1Click the ‘Scanner’ button.
2Select the ‘Custom card’ tab.
3Pressthe upper arrow button to add settings to the customcard. The maximum
number of settings that ca n be added to the custom card is five.
4Toch ange the order of the settings on the card click on one of the buttons on
the right of the ‘Custom card’ window.
5Click the ‘Apply’ button to save any changes you have made.