Oce North America TDS600 user manual Counter

operate, but it is possible that the print quality is not optimal, e.g. ‘Fill B5 toner’.

A graphical overview of available rolls and sheet feeders, including the material type and size used by each roll or sheet feeder.

■A symbol indicating the paper orientation (for sheet feeders only).

■An indication that a particular roll or sheet feeder is empty (if applicable). An empty roll is represented by a dotted roll symbol.

An empty sheet feeder is displayed as an empty paper tray.

■In the event of an error, a graphical representation of any error location (cover or panel), together with instructions on how to solve the problem is displayed.

Counter

On the operating panel of the Océ TDS600 Printer a counter will be displayed that gives the user feedback about the progress of the job that is currently being printed. The counter, which is located at the bottom of the upper window on the operating panel, displays the number of sets and/or pages printed. Counting starts at 1. The following options are available:

■When no sets are made, only the current page and the total number of pages are displayed (e.g. ‘Page 3 of 5’). At the beginning of a job, when the system does not know the total number of pages yet, only the current page may be displayed (e.g. ‘Page 5’).

■With set input: set counter. In this case the counter shows the current, the total number of sets and the current page (e.g. ‘Set 3 of 5, Page 10’). At the beginning of a job, when the system does not know the total number of sets yet, only the current set and page may be displayed (e.g. ‘Set 2, Page 5’).

■With set input: multiple sheet counter. In this case the counter shows the current page, the total number of pages and the current copy, e.g. ‘Page 2 of 12, Copy 5’). At the beginning of a job, when the system does not know the total number of pages yet, only the current page and copy may be displayed (e.g. ‘Page 2, Copy 5’).

Use the Océ TDS600 to print 27