UsetheOcéTDS600toscan 61
Buttons
With the buttons on the operator panel you can make a num ber of settings for
the Océ TDS600.
The following buttons are available:
Section, Function and Arrow buttons
Apart from the above mentioned buttons, the operator panel of the Oc é
TDS600 Copier contains a number of other buttons. These in clude:
■Section buttons
■Function buttons
■Arrowbuttons.
The section buttons are the four buttons loca ted above the display. These
buttons provide access to the ‘Custom ’, ‘Original’, ‘Print’ and ‘File’ sections
on the display.
Each section contains several functions (cards ). These can be accessed with the
help of the left most function button, whi ch is also called the card selection
button.
Button type
Function
Startbuttons The green button marked with is used to start the
feeding of the original, or to re-start the copy process.
Numeric buttons Thebuttons with numbers on the lower part of the oper-
atorpanel are used to enter numbers.
Correction button Theorange button marked with C, located at the bottom
rightof the operator panel. If you pressthe correction
buttononce, the copy counteris set to the default (prob-
ably ‘1’). If you press this button twice, all settings are
resetto their default values.
Stop button Pressing ther ed buttont oth e left of the display stops the
copy process for the current origina l. Youcan stop the
original transport imme diately when an original j am oc-
curs.
Interrupt button Currentlyno t in use.