Installation procedure for MS Windows systems

Before you install Océ Remote Logic, you must take note of the following minimum system requirements for the remote system. The system must be a Pentium 233 with 32 Mb RAM running Windows 95, 98, NT (service pack 3) or Windows 2000. Contact your local Océ organisation for more possible systems.

Océ Remote Logic (Queue Manager, System Control Panel and Settings Editor) are on the Océ TDS600 CD-ROM and on the Océ Power Logic Controller CD-ROM provided with the system. The installation procedure for Remote Logic is quite simple and self-explanatory. When you select the ‘Install remote applications’ option on the CD-ROM, a Wizard starts to guide you through the installation process. When the installation process is complete you do not have to restart your system.

Note: Remote Logic only works when TCP/IP is enabled on your system. Refer to your system administrator for assistance with the installation procedure for TCP/IP.

Install Remote Logic

1Insert the Océ remote Logic CD-ROM or the Océ Power Logic Controller CD-ROM into the CD-ROM drive of your PC.

2Select the ‘Install remote applications’ option.

The installation Wizard starts, and asks to select a setup language.

[71] Choosing a setup language

Océ Power Logic: Remote Logic

111

Page 111
Image 111
Oce North America TDS600 user manual Installation procedure for MS Windows systems, Install Remote Logic