292 Océ TDS600Multifunctional Digital SystemUser Manual
▼
▼▼
▼Fold settings from the Océ TDS600 scanner operating panel
1Open the ‘Feeding’card in the ‘Original’ section and press the ‘Legend
location’function button to select the required legendlocation (‘Leading’ or
‘Trailing’).
Note: Make certainthat your legend is alwayslocated on your left-hand
side to ensurecorrect positioningof the legendduring folding.
Press the ‘Drawing method’ function button to select ‘Stan dard’, ‘Ericsson’ or
‘Afnor’ fold.
[193] Fold options from the scanner op erator panel
2Open the ‘Finishing’ card in t he ‘Print’ section.
3Pressthe ‘Folding’ functionbutton to select ‘Full’or ‘First fold only’ (see
figure 194).
4Pressthe ‘Foldedpackage’ functionbutton and changethe length and/orwidth
of the foldedpackage, as required,by using the arrow buttons or thenumeric
buttons.
5If required, press the ‘Binding’ function button.
Set the required binding edge using the arrow buttons or the numeric but tons.
6Makeother settings as required.
Feed the original.
[194] Fold options from the scanner op erator panel