Oce North America TDS600 user manual Following dialogue box appears see figure

The following dialogue box appears (see figure 40):

[40] ‘Destination properties’ window

3Enter a logical name for the destination in the ‘Name’ text box.

This logical name also appears on the scanner panel (see figure 32 on page 68).

4Choose a destination type from the ‘Type’ drop-down list box.

You can choose between File Transfer Protocol (FTP), Server Messages Block (SMB) or local storing in the temporary store on the controller.

5Enter the name of the system you want to scan your files to in the ‘System’ text box.

6Enter a path of the target folder in the ‘Path’ text box. You can also click the ‘Browse’ button to select the path.

Note: This is only possible if you choose ‘On the controller’ as ‘Type’ (see step 4).

7Enter, if required, a user name for the network destination in the ‘User name’ textbox.

8Enter, if required, the appropriate password for the network destination in the ‘Password’ textbox.

9Click Ok to accept the destination properties.

Note: You can create a maximum number of 10 destinations.

Use the Océ TDS600 to scan 79