8Use both hands to place the holder in the roll loader (see figure 132).

d

[132] Placing the new roll in the roll loader

9Place the holder back in the roll compartment by returning the roll loader lever to its upright position. The roll will now be loaded.

Caution: Be careful when lifting the lever to avoid any possible damage to the roll compartment.

10Use both hands to slide the material under the metal paper guide until it makes contact, as described in the procedure for loading rolls of print material.

11Press the appropriate green button inside the roll compartment. The material will automatically be fed into the machine.

Note: Also refer to the sticker inside the drawer.

12Press the green button a second time to cut off the material protruding from the paper path.

13Remove the scrap material.

14Return the roll loader lever to its starting position by pushing it to the left.

15Close the paper roll compartment.

16Press the on line button to put the system off line.

17Specify the size and type of material on the operating panel.

18Press the on line button again.

Note: When you alter the size and/or media type, you have to adjust the settings on the operating panel.

Media and supplies

245

Page 245
Image 245
Oce North America TDS600 user manual Media and supplies 245