OcéPower Logic: System Control Panel 135
Scanner:to hide or to show the status of thescanner.
Controller: to hide or to show the stat us of the controller.
Memory: to hide or to showthe amount of set memory that is used.
Note: If operatorinvention isrequired for adevice, the respectivebutton
flashes.
The Printer status window Displays the current stat us of the Printer. Any error
messages displayed on the printer control pan el also appear in the printer status
window of the System Control Panel .
The Media display Provides graphical informat ion about the status of the rolls
and sheetfeeders (available, empty or dis abled) of the printer and about the
availablemedia (size and type).
Note: If the Mediatype equals polyester,the thickness is expressedin mil
(0.001"), otherwise the weight is expressed in g/m2.
When a roll or tray is disabled theroll icon is dimmed and the media
information is replaced by the t ext “-disabled-” (see ‘Icons’ on page 136).
Note: Special media are excluded from the automatic beh aviour of the Océ
Power Logic Controller.
The Scanner status display Displays the cur rent status of the scanner. Any
error messages displayed on the scanner control panel wi ll also appear in the
scanner status window of the Syst em Control Panel.
The set memory meter Indicates how much of the set memory is filled. The
informationis displayed in the form of a meter which is divided into three
zones:
■Green: safe, you have enough space left to print large jobs/ many small jobs
■Orange: pay attention, you might reach the set memory limit so on
■Red: the set memoryis (nearly) full; you should remove files or waituntil
filesare printed and automatically removed or flushed from memory. No
more printjobs are accepted. Copy jobs can stillbe made.
Note: At the right of the set memory meter a percentage is di splayed,
indicatingthe amount of set memory currentlybeing used.
Below theS ystemControl Panel main window is displayed: