246 Océ TDS600Multifunctional Digital SystemUser Manual
Cut sheet material
When a sheetfeeder is empty duringa print job, a ‘Sheet feederx empty’
message is displayed at the printer operating panel and in th eS ystem Control
Panel (SCP) application. You then have to load new cut sheet print material.
Note: Youmust f an polyester cut sheet before use to prevent sticking together.
Also avoid the use of sheets that have already been printed on one side.
▼
▼▼
▼Load cut sheet material
1Open the appropriate drawer (see figur e 133).
[133]Opening the appropriate drawer
2Release the right hand guide by squeezing the light green re lease handle on the
guide (see figure 134) and move the guide to the r equired media size indicator.
Note: Make certain that the handle is properly aligned with the appropriate
indicator.