Oce North America TDS600 user manual Drawing method, Remove leading / trailing strip

Drawing method
Description	You can use the ‘Drawing method’ option to determine how
	your output must be folded.
	Choose between Standard, Afnor and Ericsson
Min/max values	N/A
Menu path	Jobs - Copy & File - Defaults - Original card - Feeding - Draw-
	ing method
Remove leading / trailing strip
Description	Use the remove leading or trailing strip settings to remove, by
	default, a blank strip at the top or bottom of the image. The
	print length will decrease accordingly.
	‘Remove leading strip’ will remove a blank strip at the top of
	the image.
	‘Remove trailing strip’ will remove a blank strip at the bottom
	of the image.
	You can remove up to of 400 mm or 16 inch in steps of 1 mm.
	By default, no leading or trailing strip is defined.
	Remove leading or trailing strips will always work, unless you
	try to remove the entire plot.
Min/max values	N/A
Menu path	Jobs - Copy & File - Defaults - Original card - Sheet - Remove
	leading / trailing strip
Scan width method
Description	The ‘Scan width method’ option allows you to select the width
	that will be scanned:
	Standard: The width scanned is according to the automatic
	sensed original width.
	Non-standard: The scan width is extended to the first not ac-
	tivated original width sensor or maximum original size.
	Custom: Custom selected width. Useful if the original is a
	non-standard format. This setting will overrule the automati-
	cally detected original size.
Min/max values	N/A
Menu path	Jobs - Copy & File - Defaults - Original card - Sheet - Scan
	width method

156 Océ TDS600 Multifunctional Digital System User Manual