Log in

The access to the key operator, repro operator, system administrator and service operator modes is password protected to allow only authorised personnel to use particular functions.

The default password for the System Administrator is: SysAdm.

The default password for the Key Operator is: KeyOp.

The default password for the Repro Operator is: ReproOp.

Note: The default passwords are case sensitive. Change the passwords after your first log in.

How to log in

1From the ‘File’ menu, select ‘Log in’.

2Select the correct user name.

3Enter the Password.

4Click ‘OK’.

Note: You must log in into each application separately.

Log out

You have to log out to leave the key operator, repro operator and system administrator modes.

How to log out

1From the ‘File’ menu, select ‘Log out’. You return to anonymous user mode.

Note: You must log out into each application separately.

To change the password

You can change your password on a standard base. You can change the password for each user mode (except anonymous user mode, for which no password is required and service operator) by taking the following steps:

Change the password:

1From the ‘File’ menu, select ‘Log in’.

2Click the Password’ button.

118

Océ TDS600 Multifunctional Digital System User Manual

Page 118
Image 118
Oce North America TDS600 user manual Log out, To change the password