Make a scan to file

To scan an original to file is an easy operation. If the settings (see ‘Settings for scan to file’ on page 70) are correct, and the destinations have been set in the Océ Scan Manager (see ‘Océ Scan Manager’ on page 75), the only thing you have to do is press the start button on the scanner.

Scan to file

1Place your original face-down, right aligned along the original guide.

2Select the appropriate original type.

3Select the ‘Destination’ card in the ‘File’ section.

[32] ‘Destination’ card in the file section

4Press the section button ‘File’, to select ‘File mode’ On. The status message displays: Ready to scan to file.

5Select a Destination (see ‘Destinations’ on page 78).

6Press the start button . The original is scanned.

A status message displays (see figure 33 on page 69): “Scanning job “Scan job number X””

“File scan22.tif”

68

Océ TDS600 Multifunctional Digital System User Manual

Page 68
Image 68
Oce North America TDS600 user manual Make a scan to file, Scan to file