240 Océ TDS600Multifunctional Digital SystemUser Manual
Media
The Océ TDS600 is available in many configuration s, ranging from two rolls
in a single drawer, four rolls in two drawers p lus three sheet feeders and a
maximum of six rollswith one sheet feeder.
Note: Contact your Océ representative if you want to know more about the
available configurations.
Each of the rolls and sheet feeders on the Océ TDS600 may be loaded with
print materialof a different size or type. The size and typeo fthe available
media are indicated on the operat ing panel.
Note: In case you have three sheet feeders, n o A4 size material and no A3
landscape material can be used in the bottom sheet feeder. The minimum size
of media in the third sheet feeder is A2.
Attention: After loading new print material,you need to inform the system
of the size of the material and of t he type of print material that was load ed
(paper,transparent,or polyester).
The definitionof the size and type of the new print material is required to:
■Enable theautomatic media switch function to work correctly (see
‘Automatic roll switch’ on page 182)
■Preventfolding errors (when a folder is installed)
■Support autozoom and auto format functions.
Caution:It is highly advisable to placeheavy rolls (A0, A1, and 175meter
rollsof plain paper) in position 1 of the top drawer,position 3 of the middle
drawer or position 5 of the bottom drawer, to minimize user strain. The
diameterof rolls should not exceed185 mm.