5Clean the upper and lower knife using Cleaner K (see figure 159).

[159] Cleaning the upper and lower knife

6Oil the felt using Fixing Unit Cleaning Oil (silicon oil).

[160] Oiling the felt

Close the side door of the reinforcement unit. The knives are automatically placed back in their home positions. The picture on the display disappears, and the message ‘Press start to resume job’ or ‘Ready to print’ appears, depending on whether or not a job was interrupted to clean the knives.

264

Océ TDS600 Multifunctional Digital System User Manual

Page 264
Image 264
Oce North America TDS600 user manual Clean the upper and lower knife using Cleaner K see figure