Oce North America TDS600 Scanned files, Set / Change destination properties, View a scanned file

Note: The ‘Base name’ may contain ‘###’ for automatic file naming. The ‘###’ will be replaced by an ascending number. You may place as many dots in the ‘Base name’.

4Check or uncheck the ‘Add appropriate file extension’ check box to add or respectively leave out an appropriate file extension. The file extension can be set in the Océ Settings Editor see page 225.

5Click Ok to accept the settings.

▼Set / Change destination properties

1Select a destination.

2Open the ‘File’ menu and select ‘Properties’ or click the ‘Properties’ button on the toolbar (see figure 42).

[42] ‘Properties’ button on the toolbar

The ‘Destination properties’ screen appears as in figure 40 on page 79.

3Change the destination properties as described in ‘Create a destination’ on page 78.

Scanned files

The right pane of the Océ TDS600 Scan Manager contains the scanned files and additional information about the files. You can view, print and delete these files. You can also view the file properties.

▼View a scanned file

1Select a file in the right pane.

2Open the ‘File’ menu and select ‘View’ or click the ‘View’ button on the toolbar (see figure 43).

[43] ‘View’ button on the toolbar

Océ View Station LT (see ‘Océ View Station LT’ on page 86) starts up and displays the file.

Note: When you scan to file the controller Océ View Station LT starts automatically, showing the result of the scan.

▼Print a scanned file

1Select a file in the right pane.

Use the Océ TDS600 to scan 81