[61]Brightness settings

Set the automatic background compensation

1 Open the ‘Image’ card in the ‘Original’ section.

2 Press the ‘Background compensation’ function button if this function is

disabled.

When copying extremely light or dark originals, or originals with unequal background density, the result may not meet your requirements (e.g. too much background). In such cases you can manually adjust the brightness (see figure 61).

Original type The Océ TDS600 Copier allows you to adjust the exposure setting according to the type of image on the original. There are six original types available. Select a suitable mode according to the original (see figure 61 on page 99).

Set the original type of your image

1Press the ‘Original type’ function button to select the appropriate image type:

By default ‘Lines/text’ is selected with ‘Background compensation’ enabled. This is the most suitable setting for originals that contain characters and line art.

Press the ‘Original type’ function button to select ‘Photo’ when the original

consists of a combination of characters, line art and picture images. Note: If you select ‘Photo’ or ‘Grays&lines’ , the ‘Background compensation’ will be switched off automatically, by default.

Press the ‘Original type’ function button to select ‘Grays&lines’ when the original contains many gray scales and lines.

Press the ‘Original type’ function button to select ‘Blue print’ when you want to copy an original with an image in ‘negative’ (image in white on dark background). The copy will be ‘positive’ (image in black on white background).

Special copy and scan jobs

99

Page 99
Image 99
Oce North America TDS600 user manual Set the automatic background compensation, Set the original type of your image