Oce North America TDS600 Key operator settings, Make key operator settings in the Settings Editor

Key operator settings

In order to perform special key operator functions, you must log into the Settings Editor as a key operator.

As these functions are restricted to a dedicated key operator, a password is required to access them. The service engineer will provide this password to you upon installation.

Note: When you are finished, make certain you log out of the Key operator mode of the Settings Editor to prevent unauthorized use of the Océ TDS600.

▼Make key operator settings in the Settings Editor

1Maximize the Settings Editor on the screen.

2Log in as key operator.

3Click on one of the top buttons to display the desired group of settings.

4Select the setting you want to update in the tree structure.

5Update the setting in the update area, as required.

Note: A few settings, such as the defaults for the Custom card, are made directly from the tree structure area.

6Click on the ‘Apply’ button.

The new value is now applied for the setting

7Log out of the Key operator mode when you have finished updating the settings.

Océ Power Logic: Settings Editor (for the key operator) 151